Mtroniks digiSOUND5m - Large Multi Cylinder Air Start Diesel Waterproof Sound Module
The digiSOUND5m is the worlds first 100% waterproof, plug n play sound module designed to take the hassle out of giving your model a realistic sound! The sound module requires NO programming or set up, it comes with a realistic sound pre-installed leaving just the installation to complete before you can get under way! The unit comes complete with built in amplifier, wiring loom and even a 75.0mm diameter waterproof speaker!
You simply install the unit in your model and go! There is no complicated PC interface to deal with or complicated set up, you REALLY do just have to plug it in and go!!!
The digiSOUND sound module for model boats will operate between 6.0 and 12.0V
Click below for a sample of the Large Multi Cylinder Air Start Diesel engine sound.
Sound clip: www.mtroniks.net/resources/LargeMulitCylinderAirStartDiesel.MP3
NOTE: This recording was created using the standard speaker that comes included with the sound module, the quality of the sound you hear will depend very strongly on the speakers on your computer and may not give an accurate representation of the high quality sound you get from the digiSOUND system. This is just to give an idea of the sound you can expect, the sound includes a start up, idle, up to full speed, back to idle, a quick blast on the horn then shutdown.
Detailed specification of module and speaker
Module power output: 5 Watts RMS @ 12V (4 ohms), distortion typically 0.1%
Speaker rating: 2.5 Watts RMS (8 ohms), It is possible to run 2 speakers in parallel
Notes on speaker performance.
The 75.0mm speaker included with your module is waterproof so it is safe to use in your model boat, you should always install your speaker into a suitable enclosure (somewhere in the upper surface of the hull) to ensure the best power handling, frequency and bass response.
Speaker systems with a broader frequency response which include tweeters and larger woofers are available as optional extras.